SENIOR/3 manual control module
Product description
Control module for compressed gas with two inlets and single model 451 pressure regulator with one pressure gauge.Gas specific inlet connection.Outlet with Ø16 mm weld-on pipe connector.Max. Nitrogen capacity at 12 bar = 90 Nm³/h, 1500 Nl/min.The control module can be fitted with pressure gauges with electrical contacts, pre-calibrated with a 15 bar alarm threshold to signal manifold empty.All the components are installed on an Anodized aluminum wall mount plate.
Normatives
EN ISO 5171 | EN ISO 7291 | EN ISO 9539Components
No.1 model 451 pressure regulator made of CW614N brass.
The pressure is regulated by adjusting a stainless steel pressure adjustment set screw.
No.1 overpressure discharge valve, integrated into the pressure regulator, made of CW614N brass.
No.1 gas specific inlet.No.1 Ø16 mm weld-on pipe connector on the outlet.
No.2 shut-off valves made of CW614N brass.
No.1 inlet 0-315 bar pressure gauge (0-40 bar for acetylene and propane), class 2.5.
N.1 outlet 0-16 bar pressure gauge (0-2.5 bar for acetylene and propane), class 2.5.
Stainless steel springs.
NBR membrane.
NBR O-ring.
Teflon seat.
Nylon gaskets.
Anodized aluminum mounting plate.
Maintenance kit
CODE | DESCRIPTION |
CK040 | MAINTENANCE EQ 451 PRESSURE REDUCER H.P. |
CK041 | MAINTENANCE EQ 451 PRESSURE REDUCER L.P. |
Technical data
CODE | GAS | Q max. | P1 max. | P2 max. | INLET CONNECTION | OUTLET CONNECTION | WEIGHT |
CQ094 | OXYGEN, NITROGEN, ARGON, HELIUM, CARBON DIOXIDE, AIR | 90 Nm³/h | 200 bar | 12 bar | W21,7x1/14" M R | Ø 16 mm weld-on pipe | 7,0 kg |
CQ108 | HYDROGEN, METHANE | 90 Nm³/h | 200 bar | 12 bar | W20x1/14" 'A' M L | Ø 16 mm weld-on pipe | 7,0 kg |
CQ109 | ACETYLENE | 18 Nm³/h | 25 bar | 1,2 bar | W20x1/14" 'A' M L | Ø 16 mm weld-on pipe | 7,0 kg |
CQ110 | PROPANE | 30 Nm³/h | 15 bar | 2 bar | W20x1/14" 'A' M L | Ø 16 mm weld-on pipe | 7,0 kg |